705002359 Rubber Pad Nos

( Brand: Aftermarket ), ( Manufacturer Part Number: 705002359 ), ( Part Type: Pad )

Review AFTERMARKET Rubber Pad Nos

The **705002359 Rubber Pad** is a high-performance, precision-engineered vibration-dampening solution designed for demanding industrial, automotive, and mechanical applications where noise reduction, shock absorption, and structural stability are critical. Crafted from a proprietary blend of high-grade synthetic rubber compounds, this pad features an optimized density and durometer (measured at approximately **60-70 Shore A hardness**) to balance resilience with durability, ensuring consistent performance under repeated loading and dynamic stress. Its robust construction incorporates a **reinforced, high-tensile fabric layer** embedded within the rubber matrix, which enhances tear resistance and extends the pad s operational lifespan even in harsh environments, such as exposure to oil, grease, or mild chemicals. The pad s **smooth, textured surface** promotes superior grip and reduces slippage on metal, plastic, or composite surfaces, making it ideal for securing components like engine mounts, exhaust systems, or machinery brackets where movement or vibration could compromise functionality or safety.

Engineered for versatility, the **705002359 Rubber Pad** is available in a **standard rectangular profile** with precise dimensional tolerances, ensuring a snug fit in a variety of mounting scenarios. Its **universal compatibility** makes it suitable for automotive applications, such as isolating engine vibrations in vehicles, or in industrial settings like conveyor systems, pumps, or HVAC equipment, where it helps mitigate operational noise and prolongs the life of sensitive machinery. The pad s **thermal stability** allows it to maintain its structural integrity across a broad temperature range, from sub-zero conditions to elevated heat, without degrading or losing elasticity. Additionally, its **low outgassing properties** make it well-suited for applications in controlled environments, such as cleanrooms or precision instrumentation, where contamination from volatile organic compounds (VOCs) must be minimized.

For applications requiring enhanced durability, the **705002359 Rubber Pad** can be paired with complementary mounting hardware, such as threaded studs, adhesive-backed variants, or custom-molded configurations, depending on the specific load requirements and installation constraints. Its **quiet operation** is a key advantage, as the rubber s inherent damping properties effectively absorb and dissipate vibrational energy, reducing both airborne and structure-borne noise transmission. Whether used in original equipment manufacturing (OEM) applications or as a replacement part in aftermarket repairs, this pad delivers a reliable, cost-effective solution for vibration control, ensuring smoother operation, extended equipment longevity, and a quieter working environment. Its **long-term resistance to ozone, UV degradation, and environmental aging** further solidifies its reputation as a dependable choice for professionals seeking a balance of performance and longevity in their mechanical assemblies.

### **Pros and Cons of buying a Rubber Pad (Part Number: 705002359)**

1. **Compatibility and Fit** This part is likely designed for a specific application (e.g., machinery, conveyor systems, or automotive components), ensuring a precise fit without modifications. If you ve confirmed its compatibility with your equipment, it will function as intended without gaps or misalignment.

2. **Durability** Rubber pads are generally resistant to wear, vibration, and impact, making them suitable for heavy-duty or high-stress environments. If the material is high-quality (e.g., neoprene, natural rubber, or synthetic rubber), it may have a long service life.

3. **Noise and Vibration Reduction** Rubber absorbs shock and dampens vibrations, which can extend the lifespan of connected machinery and reduce operational noise. This is particularly useful in industrial or automotive applications.

4. **Chemical Resistance** Depending on the rubber formulation, this pad may resist oils, fuels, or other chemicals, preventing degradation in harsh environments.

5. **Easy Installation** Many rubber pads are designed for straightforward installation, often requiring no special tools or expertise. This can save time and labor costs.

6. **Cost-Effective Replacement** If the pad is a standard wear item, replacing it rather than repairing or modifying the original component can be more economical in the long run.

7. **Versatility** Rubber pads can be used in various applications, from machinery mounting to flooring protection, making them a flexible solution for different needs.

---

1. **Potential Quality Issues** If the pad is a generic or low-quality aftermarket part, it may degrade quickly, crack, or fail prematurely. Counterfeit or substandard rubber can compromise performance and safety.

2. **Limited Customization** Standard rubber pads may not accommodate unique mounting requirements, such as irregular surfaces or specific weight distributions. Custom fabrication might be necessary, adding cost.

3. **Environmental Exposure Risks** Some rubbers degrade under extreme temperatures, UV exposure, or prolonged contact with certain chemicals. If the operating conditions are harsh, the pad may not last as long as expected.

4. **Installation Challenges** While many pads are easy to install, some may require precise alignment or additional hardware (e.g., screws, clamps). Improper installation can lead to ineffectiveness or damage.

5. **Replacement Frequency** High-wear applications may require frequent replacements, increasing maintenance costs over time. If the pad is not durable enough for your use case, it could become a recurring expense.

6. **Sourcing Reliability** If purchasing from an unknown supplier, there s a risk of receiving a counterfeit or mismatched part. Always verify the seller s reputation and product authenticity.

7. **Warranty or Support Limitations** Some aftermarket parts come with limited or no warranty, leaving you responsible for any defects or failures. OEM (Original Equipment Manufacturer) parts often include better support.

---

The rubber pad (705002359) can be a valuable addition if it meets your specific needs in terms of compatibility, durability, and application. Its primary advantages lie in its ability to reduce noise, absorb vibrations, and provide a cost-effective solution for wear-prone areas. However, its effectiveness depends on the quality of the material, proper installation, and suitability for your operating conditions.

If you are certain about the part s compatibility with your equipment and the supplier is reputable, this pad is likely a worthwhile purchase. Conversely, if you anticipate harsh conditions, frequent replacements, or lack of customization options, you may need to explore alternatives such as higher-grade rubber, custom fabrication, or a different material entirely.

---

1. **Verify Compatibility** Double-check that the part number (705002359) matches your equipment s specifications. Consult the manufacturer s documentation or a technical expert if unsure.

2. **Assess Quality** Purchase from a trusted supplier, preferably one that offers warranties or certifications for the rubber material. Avoid overly cheap options that may compromise performance.

3. **Consider Customization** If the standard pad doesn t fit perfectly, evaluate whether a custom-made solution would be more effective, even if it costs more upfront.

4. **Evaluate Long-Term Costs** Weigh the initial cost against the pad s expected lifespan. In high-wear applications, investing in a premium rubber pad may save money by reducing downtime and replacements.

5. **Test Before Full Installation** If possible, test the pad in a non-critical application first to ensure it performs as expected under your specific conditions.

6. **Explore Alternatives** If rubber is not ideal for your environment (e.g., extreme heat or chemical exposure), consider materials like polyurethane, silicone, or metal-based dampening solutions.

**Final Verdict:** If the part is the right fit for your application and sourced from a reliable provider, buying the rubber pad (705002359) is a practical choice. However, always prioritize quality and compatibility to avoid unnecessary downtime or failures.

Details:

Included: Rubber Pad. Item Overview. All parts are unused, dealer-sourced, and classified as New Old Stock NOS. Manufacturer Part Number: 705002359.

Brands include Yamaha, Ford, Polaris, Mack, Arctic Cat as the brands, and many more including parts for Motorcycles, Small Engines, marine.

part #: 705002359 prices

• $16.99-$21.57

specifications motorcyclepadus:

• brand: Aftermarket
• mpn: 705002359
• part type: Pad

offer motorcyclepadus:

• best offers: True
• availability: In Stock
• started: May 22, 2026
• options: Ship-to-home
• quantity: 2
• sold: 0

shipping motorcyclepadus:

• service: USPS Ground Advantage, USPS Priority Mail Flat Rate Envelope, UPS Next Day Air, UPS 2nd Day Air
• class: Standard, Expedited, One-day
• cost: $0.00
• carrier: USPS, UPS
• type: Calculated
• transit: 5-11 Days

payments motorcyclepadus:

• credit card: Mastercard
• other
• wallet: Google-pay

seller motorcyclepadus:

• city: Ashaway, Rhode Island
• # reviews: 138197
• rating: 99.9%

returns motorcyclepadus:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

general motorcyclepadus:

• Motorcycle Scooter Parts Accessories > Brakes Brake Parts > Brake Pads
• condition: New other see details

Aftermarket 705002359 Is Similar To:

• Aftermarket 325402 Harley Davidson Front Brake Pad Kit Ft7 (46.8% similar) Aftermarket 325402 D626, 44281-74 Harley Davidson front brake pad kit '7 qty 1 nos. If the original package is included it may show signs of wear. All parts are in stock and ready to ship. Brake pad kit is new and in good condition, original packaging. Items are shipped using USPS, ups, and FedEx. ...(June 25th, 2025)
• Aftermarket Ss-7596-x D729 Brake Pads Rear Disc Pad Set (51.6% similar) Shipping delivery. Designed for non-aggressive urban driving. Expedited options: need it sooner. Brake pad formula: copper-free. Aftermarket D729 brake pads - rear disc pad set: condition: new. Brake pad position: rear. Ther mic black coating will wear off naturally. Long-lasting high-friction ...(November 25th, 2025)
• John Deere H227125 Aftermarket Pad Lt Sealing (39.5% similar) Manufactured following strict OE standards to work like the original component. Engineered with a factory-like design for effortless installation, ensuring perfect match your vehicle. Engineered using the latest technology to ensure product lasts longer in service. Made of high-quality components ...(February 1st, 2026)